Category: Structures
Formwork is the mould to shape the concrete structure. Good concrete cannot be made from a poor mould; thus formwork is very important in producing good concrete. Besides that, …
Sustainable Construction is the selection of materials or products for the construction activities in terms of reducing the use of natural resources, ability of reusing the materials and reducing …
Steel bars should cut and bend to the required shape at the bar bending plant located in site. Initially the required bar schedule prepared according to the reinforcement drawings by the structural …
Normally, steel bars have a 6m length. If length of a bar is not enough to keep the reinforcement, we have to lap two steel bars. Normally, lapping position is …
There is a standard way of bar notation that should be followed according to the drawings. This notation indicates the bar diameter, type, spacing, correct location, and the number …
Crank is a slight bending in bars at the lap so that maintains the clear cover even at the lap position. The rule that is generally practiced is that the slope …
A cofferdam is a construction structure that retains water and soil that allows the enclosed place to be pumped out and excavated to be dry. Cofferdams are generally used …
Honey combs can be simply be defined as a rough, pitted surface or voids in concrete resulting from incomplete filling of the concrete against the formwork, often caused by using concrete that is too stiff …
Waterproofing is the process of making an object or structure waterproof or water-resistant. Insulation (thermal insulation) is a general term used to describe products that reduce heat loss or …
This post guide you about anchor bolt,I have attached Real Photos took by me in my construction site, Anchor Bolt is used to attach objects or structures to …
